Recently added

When to use I²R, V²/R or VI while calculating Electric Power?

Image
I came across a question that was asked to me quite a couple of time: When to use I²R, V²/R or VI while calculating power? At first, the question looks simple and as if it needs no formal explanation but that's not the case. Use of any of them will give the correct result provided that you apply it correctly. Correct application is possible only when you understand the type of circuit you are dealing with. Another important point is to use the one which is going to take less time and help you calculate easily. All of the three equations tell the same thing but their usage is subject to the type of problem you're trying to solve. Let us understand when, how an what to use while calculating power in an electrical circuit.

ARCING at the circuit breaker contacts | Reasons, Risks and Remedy

Arcing at Circuit Breaker Contacts 

Reasons•Risk•Remedy


Arcing is a phenomenon commonly seen whenever a circuit breaker is operated. This video describes the reason of arcing, why it is dangerous and how to stop it. Watch here


Comments

Popular posts from this blog

Why earth pin in a 3 pin plug made thicker and longer than other 2?

Working & Application of a Variable Voltage Variable Frequency Drive (VVVfD)

CONVERT AC TO DC using transistors cheaply and Easily | RECTIFIER